DeWalt DCF894 vs DCF899

DeWalt DCF894 vs DCF899

If you're looking to repair your vehicle or do different types of maintenance at home or in your workshop, you'll undoubtedly need an impact wrench. This is one of the handiest tools in any woodworker's or mechanic's workshop. A reliable impact wrench lets you effortlessly and safely install and remove bolts, nuts, and wheels. 

Meanwhile, not all impact wrenches are designed equal, and buying an adequate one might not be an easy process. Similar to most power tools, you have to factor in variables such as skill level, budget, and usage frequency. 

For this reason, we'll review the DeWalt DCF894 and DCF899 and see which one is better. Read-on to find out more.





7.1 lbs.

3.84 lbs.

Maximum torque



Breakaway torque


600 ft/lbs.

Brushless motor





6.95 inches

Bit holder

0.5-inch drive with hog ring anvil

0.5-inch detent pin

LED light



3 speed modes



DeWalt DCF894 Overview 

This is a 0.5-inch impact driver that delivers impressive potency on a compact body and slightly less torque compared to high-torque impact wrenches. It is part of the new category known as the Mid Torque impact drivers, though DeWalt refers to them as Mid-Range impact drivers. 

The DeWalt DCF894 Impact driver weighs 1.5kgs and offers impressive fastening torque. Additionally, it has three speed modes and a fascinating feature known as Precision Wrench Control. This feature comes in handy when you need more control using the forward and reverse aspects. 

For instance, when in forward, this power tool will pause a bit before impacting to hinder over-tightening. On the other hand, when in reverse, this impact driver decelerates when the fastener is not so tight to prevent run-off. 

Furthermore, the DeWalt DCF894 features a brushless motor, and thanks to it, this compact impact driver delivers a decent amount of torque. It as well has all the typical conveniences like a belt clip, LED light, and speed trigger. 

The primary takeaway of this impact wrench is that it offers 330ft/lbs torque which is quite impressive considering its size. Also, it features a detent pin which comes in handy for socket switching.

The ergonomic design makes it easy for you to utilize it for a long time, without fatigue, since it is lightweight. Also, the In-built LED light comes in handy when you're working in dimly lit surroundings. The rubberized handle is also convenient since it offers a firm yet comfortable grip, preventing accidental slippage. 

DCF894 Pros and Cons


  • Provides enough torque for light and medium tasks
  • The three modes adjustments make it highly versatile and offer more control over your project 
  • User friendly and lightweight, thus making it convenient to utilize for extended periods
  • The LED light makes it handy in the dark and dimly lit workstations 
  • The soft rubberized grip allows you to hold it firmly and comfortably 
  • The compact and lightweight build makes it highly portable and easy to maneuver in tricky angles. 


  • It does not come with a battery; thus, you have to purchase it separately.


While this power tool offers high torque and is easy to use, it is better suited for light and average tasks. The brushless motor provides more runtime and efficiency, making it perfect for beginners and DIY woodworkers. 

DeWalt DCF899 Overview 

DeWalt produces high-quality, reliable, and durable power tools, and the DCF899 impact wrench is no exception. It features a brushless motor that offers more sturdiness, reliability, and longer runtime, and lifetime. The brushless motor technology is typically more powerful than brushed motors. 

Moreover, the DeWalt DCF899 impact wrench is powered using a 20V Lithium-ion battery. The three years warranty is also an appreciated bonus. The ergonomic construction offers you a more comfortable use and grip, while the lightweight construction makes it highly portable. Also, the no self-discharge offers optimum productivity. 

The design of the DCF899 is quite impressive, and the tool`s easy to utilize. The ergonomic and rubberized grip is one of the reasons why it is so comfortable to use this power tool. It helps you finalize the task with decent precision. Also, the LED light comes in handy when you're working at night or in dark surroundings. 

Besides, they have excellent stability and can effortlessly survive wear and tear. Therefore, when it comes to performance, this impact driver will undoubtedly impress you. 

DCF899 Pros and Cons


  • The rubberized grip offers a comfortable and firm grip
  • Compact and lightweight design makes it highly portable 
  • The speed regulator makes it easy to select your preferred speed, thus offering you more control over your work
  • User friendly
  • High torque makes it suitable for both domestic and commercial tasks


  • It is relatively expensive, thus not ideal for people on a budget


The DeWalt DCF899 is ideal for both home and commercial utilization. It has impressive torque, has a lightweight build, and is easy to use.

What is the Difference Between DCF899 vs DCF894?

These two impact wrenches from DeWalt have a lot to offer. Whether you're looking for an impact wrench for home use or commercial use, the DCF899 and DCF894 will come in handy. 


The DeWalt DCF899 weighs 7.2 lbs, while the DCF894 weighs 1.5 Kgs, making the DCF899 a bit heavier than its counterpart. Therefore, if you are looking for a lightweight tool, the DCF894 is the way to go. 


The DCF 899 offers a maximum torque of 447Nm and a break-away torque of 745 Nm, which is higher than the DCF894 impact wrench's 330ft/lbs and 600ft. lbs. 

This means that the DCF 899 is ideal for both light and heavy-duty tasks, while the DCF894 is not quite suitable for heavy-duty tasks. But if you only need an impact wrench for basic tasks, the DCF894 is a good option. 

On the other hand, if you're looking for a bit more power for more demanding tasks, the DCF899 impact wrench is a better option. 

Bit holder

The DCF899 features a hog ring anvil, while the DCF894 has a detent pin. Typically, the Hog ring anvil is superior to the detent pin, though this should only be a factor to consider if you switch sockets frequently. 

What are the Similarities Between DCF894 vs DCF899?

LED light

These two impact wrenches feature LED lights for working in dimly-lit conditions. Also, if your site is not that good, this light will come in handy. 

Three-speed mode 

Lastly, the DCF889 and DCF894 have three speeds that offer you additional control over your project. 

DCF894 vs DCF899 Which One is Better?


Winner: DeWalt DCF899

While both these impact drivers have a lot to offer, the DeWalt DCF899 is prevalently better than the DCF894. It has higher torque, ideal for demanding projects, and if you switch sockets, it has the more superior hog ring anvil.

However, if you are looking for a lightweight impact drill for home use, the DCF894 is a good option. Plus, if you're on a budget, it is more affordable than the DCF899.


The DCF 899 offers a maximum torque of 447Nm and a break-away torque of 745 Nm, which is higher than the DCF894 impact wrench's 330ft/lbs and 600ft. lbs. 

Bit Holder

The DCF899 features a hog ring anvil, while the DCF894 has a detent pin.


The DCF899 has a higher price than the DCF894, but the added power, torque and features make it a good value.

"This site contains affiliate links to products. We may receive a commission for purchases made through these links."

Leave a Reply

Your email address will not be published.