Wen 6550 vs 6552 | Which Planer ?

Wondering which planer to choose the Wen 6550 vs 6552 ?

Lets take a brief look at both models and then see where the differences arise.​


Wen 6550 Review

The Wen 6550 is a 12.5 inch thickness planer that is powered by a 15 Amp motor giving a cutting speed of 18,000 cuts at a feed rate of 26 feet per minute.

It has a dual blade design and can plane boards up to 6 inches thick. The blades can be reversed to help extend their operational life.

A smooth granite table is virtually warp free and the base is made from heavy cast iron for added sturdiness.

There are height adjustable infeed and outfeed tables that can help to eliminate snipe during usage.​ There is also a tri-roller system to keep the feed as smooth as possible.

​For each pass at the blades a depth knob adjuster enables you to strip off up to 3/32 of an inch per round.

The 6550 can be mounted on either a planer table or bolted down to a work bench for a more permanent solution.​

Specifications

  • 15 Amp motor
  • 12.5 inch wide capacity
  • Adjustable plane depth up to 3/32 inch per pass
  • Warp free granite table
  • 2 year warranty

Wen 6552 Review

The Wen 6552 is a 13 inch table top planer that has a cutting speed of 25,500 cuts per minute at a feed rate of 26 feet per minute.

It has virtually all of the same specifications as the Wen 6550 apart from the larger feed width and the lower number of cuts per minute.​

Specifications

  • 13 inch wide capacity
  • 15 Amp motor
  • 25,500 cuts per minute
  • 2 year warranty

Wen 6550 vs 6552​

​Wen 6550 vs 6552 which do you choose?

Well clearly they practically the same machine the decision you have to make is do you need the slightly wider board size of 13 inches ?

If you are on a budget the Wen regardless of the width certainly makes sense however if you are looking for something from one of the bigger brands then the DeWalt DW734 or DW735 ​may be more suitable.

admin
 

Click Here to Leave a Comment Below 0 comments