Saws
Makita 5007MG vs 5007MGA
If you are searching online and wondering what is the difference between the Makita 5007MG vs 5007MGA then rest assured you are not the only one!
Circular saws take the pain out of cutting sheets and lengths of wood to size. There are many available on the market today. A lot of brands have multiple different models and it can be a little confusing which one to choose.
Before we compare the Makita 5007MG vs 5007MGA lets first look at each model and see what kind of specifications they have.
Makita 5007MG Review
The Makita 5007MG is a 7-1/4 inch circular saw which is powered by a 15 Amp using 2300W of power. It's inductive motor enables it to spin the blade to a top speed of 5800 rpm.
With that much power at the blade the 5007MG can cut through a variety of materials from wood to ceramics. Provided of course you have the correct blade.
It has a cutting depth of 2-1/2 inches deep which should be sufficient for most onsite cutting tasks and is certainly more than adequate for a home wood shop and the occasional DIY'er.
In terms of cutting angle adjust-ability the Makita 5007MG has positive bevel stops at the most common angles of 22.5 and 45 degrees. It also has a maximum bevel angle of 56 degrees.
Although the 5007MG does not come with a dust extraction unit built in it does however have a dust blower that blows along your cut line. The blower does keep the immediate space in front of and around the blade clear of dust and wood chips so it is still a nice alternative to have.
It comes with a carbide tipped 7-1/4 inch blade that is a fairly heavy duty woodworking blade. The blade is an M-shaped , 2 pointed tips and 10-degree bevel face design. It is certainly nice to have a high quality blade included in the overall package along with the blade wrench.
The design features a nice ergonomic handle which has rubber grips in all the right places. There is also a built in base ruler on the front of the saw. This ruler is quite a handy addition especially where it is located.
Specifications
- 15 Amp motor that spins to 5800 rpm
- Cutting depth 2-1/2 inches
- Bevel stops at 22.5 and 45 degrees up to a max of 56
- LED light and dust blower on front
- Base ruler on front
- Blade, blade wrench, rip fence and case included
Matika 5007MGA Review
So how does the 5007MGA differ from the 5007MG above ?
Ultimately the major difference is that it has a built in electric brake and has a slightly smaller form factor than the 5007MG. Same motor, same cutting performance. Same Makita quality.
The electric brake allows the blade to stop as quickly as possible once you take your finger off of the trigger. Is this a major requirement?
For the pro onsite waiting for a blade to stop may have a slight impact on productivity(and potentially safety). For the home wood shop this isn't exactly a deal breaker.
Specifications
- All the same performance as the 5007MG above
- Built in electric brake
- Slightly smaller in size
Makita 5007MG vs 5007MGA
So which is the winner the Makita 5007MG vs 5007MGA?
Well if you absolutely need an electronic brake on your circular saw then I guess the 5007MGA is worth the extra few bucks. If not then the 5007MG is a perfectly adequate circular saw for any home wood shop or occasional user.
<<< View the Matika 5007MG on Amazon >>>
<<< View the Matika 5007MGA on Amazon >>>
See how the it stacks up against the competition in the Makita 5007MGA vs DeWalt DWE575SB circular saw comparison.
